Puedes obtener un presupuesto en un plazo de 24 horas para todas tus solicitudes.Simplemente envía un correo electrónico a info@adamsint.net o completa el formulario a continuación.
Contáctenos
ATEX FLANGE HEATER 260kW 480V 3PH - VULCANIC Spain
Descripción: 260kW 480V 3Ph Flange Heater according to GA Drawing No. 6046605 Rev00:
- ATEX certified, II 2 G Ex de IIC T1 Gb
- 54 removable Heating cartridges Ø16 mm installed in stainless steel pockets.
- 10" 600# RF Flange in painted carbon steel
- Terminal box IP66, Ex "d+e" type for power and control
- 2 x K-type thermocouple fitted on pin for element over temperature control.
Items delivered with one gasket.
Special conditions must be taken to allow the safe use of this equipment. Refer to the instructions manual.
Requirements for a safe use :
- The safety device monitoring the surface temperature of the heating elements must avoid the overheating of the
external parts of the equipment in contact with the hazardous atmosphere, and must switch off the power supply
according to a wiring diagram with positive safety (a manual reset is necessary). If necessary, a forced cooler must be
installed to prevent this overshoot (pressurized air, blower...).
- To heat gas in vacuum conditions is prohibited.
- Precautions must be taken so that the heating part is never in contact with an explosive mixture. When a non-inert gas
is heated, a gas analyzer should be installed, which switch off the power supply according to a wiring diagram with
positive safety (a manual reset is necessary).
- The maximum temperature of the gas to be heated and the set point of the safety devices must comply with the data
of the instructions manual. Immersion heaters are designed, manufactured and tested to fulfil the main safety
requirements of the PED 2014/68/EU (appendix I).
Consequently, they can be installed on a pressure vessel subjected to the PED, until the risk of category IV, within the applicable limits
PS, max TS and min TS.
CONTÁCTENOS PARA ORDENAR EL MEJOR PRECIO Y ENTREGA PARA VULCANIC MARCAATEX FLANGE HEATER 260kW 480V 3PH TAMBIÉN PUEDE SOLICITAR OTRO NÚMERO DE PARTE. PODEMOS OFRECER EL MEJOR PRECIO Y ENTREGA CON UNA AMPLIA RED DE DISTRIBUCIÓN DE PRODUCTOS EN USA Y EN TODO EL MUNDO EN EL MERCADO DE PRODUCTOS INDUSTRIALES.
Descargar CATÁLOGO DE PRODUCTOS DE VULCANIC
Formulario de Consulta
Puede contactar con nosotros a través del siguiente formulario o directamente enviando correo a:
ETIQUETAS
VULCANIC
ATEX FLANGE HEATER 260kW 480V 3PH
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH
Sales ATEX FLANGE HEATER 260kW 480V 3PH
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Ventas
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Precios
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Precios de Ventas
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Ventas
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Precios de Ventas
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Estados Unidos
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Ventas en Estados Unidos
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Precios de venta en Estados Unidos
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Precio del Reino Unido
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Ventas en el Reino Unido
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Precios de venta en el Reino Unido